FlexPak 3000 Key Attributes
- Non-regenerative or regenerative (required for reversing) configurations available
- Capable of 150% full-load current for 1 minute
- Rated ambient temperature at nominal current: 40°C
- 0-10 VDC manual speed reference
- User selectable +10 VDC analog +10 volt or 4-20 mA speed reference
- Two 0-10 VDC analog outputs
- Speed feedback from analog DC tachometer
- Coast stop, auto/manual, forward/reverse, jog, run and stop inputs
- Motor thermostat diagnostic input
- Brush wear diagnostic input
- Customer interlock diagnostic input
- Drive running contact output
- Drive alarm contact output
- Drive fault contact output
- Field Current Regulator
- Self-tuning of speed and current loops without disconnecting the field
- Field (current) loss protection
- User selectable stop modes
- I/O expansion card expands drive capability
|
|
