Mounting Position Codes

The metal container junction box is usually on the side of the motor where the stator (windings) leads are attached to leads going to the power supply. The normal position for NEMA "F1" motors is located on the left side when facing the drive end of the motor. The normal position for IEC "B3" motors is located on the right side when facing the drive end of the motor.

Floor Mountings


Assembly F-1

Assembly F-2

Wall Mountings


Assembly W-1

Assembly W-2


Assembly W-3


Assembly W-4

Assembly W-5

Assembly W-6

Assembly W-7

Assembly W-8


Ceiling Mountings

Assembly C-1
Assembly C-2


Copyright ©2007, Baldor Electric Company.
All Rights Reserved.